This guide provides comprehensive instructions for using the BiLT Bluetooth helmet. It covers key topics including charging the helmet, pairing it with other devices, using the helmet’s features, and troubleshooting common issues. Whether you’re a seasoned rider or a new enthusiast, this guide will equip you with the knowledge to maximize your BiLT Bluetooth helmet experience.

Introduction

Welcome to the world of connected riding with the BiLT Bluetooth helmet! This innovative helmet combines cutting-edge technology with comfort and safety, enhancing your riding experience in ways you never thought possible. Whether you’re cruising on open roads or navigating city streets, the BiLT Bluetooth helmet empowers you to stay connected, entertained, and informed while on the go.

This comprehensive guide will walk you through every aspect of using your BiLT Bluetooth helmet, from initial setup to advanced features. It covers essential steps like charging the helmet, pairing it with your smartphone and other devices, and utilizing the intercom system for seamless communication with fellow riders. You’ll also discover how to customize settings, troubleshoot potential issues, and ensure your helmet remains in optimal condition.

Get ready to unlock the full potential of your BiLT Bluetooth helmet and experience the freedom of connected riding. Let’s dive into the world of seamless communication, enhanced audio, and advanced features that will redefine your motorcycle adventures.

Charging the Helmet

Before embarking on your first ride with your BiLT Bluetooth helmet, it’s essential to ensure it’s fully charged and ready to go. The helmet features an embedded rechargeable battery, designed to provide extended talk time and music playback. To charge your helmet, follow these simple steps⁚

1. Locate the micro-USB charging port on your helmet. It’s typically located on the side or bottom of the helmet, depending on the model.



2. Connect the supplied USB power and data cable to the charging port. The other end of the cable should be plugged into a computer’s USB port or a standard USB wall charger.
3. The LED indicator on the helmet will illuminate, indicating that the charging process has begun. The color of the LED may vary depending on the charging status. Refer to your helmet’s user manual for specific LED color interpretations.
4. Allow the helmet to charge for approximately 3 hours before use. The battery will reach full capacity, providing you with the maximum talk time and music playback.

It’s important to note that the BiLT Bluetooth helmet is water-resistant but not waterproof. Avoid exposing the charging port to excessive moisture or submerging the helmet in water during the charging process. Always disconnect the charging cable from the helmet once the battery is fully charged to prevent overcharging.

Pairing the Helmet

Pairing your BiLT Bluetooth helmet with your smartphone, GPS navigation system, or other Bluetooth devices is a straightforward process. This allows you to seamlessly enjoy hands-free calls, listen to music, and receive navigation instructions while riding. Here’s a step-by-step guide to pairing your helmet⁚

1. Ensure your helmet is powered on. The LED indicator should be illuminated, indicating the helmet is ready for pairing.
2. Place your smartphone or other Bluetooth device in pairing mode. This is typically achieved by accessing the Bluetooth settings on your device and selecting “Pair new device” or a similar option.
3. On your helmet, locate the multi-function button. This button is usually located on the side of the helmet, and its exact position may vary depending on the model.
4. Press and hold the multi-function button for approximately 8 seconds until you hear a voice prompt indicating “Phone pairing” or “Pairing mode.” This signifies that the helmet is now discoverable by other Bluetooth devices.
5. On your smartphone or other Bluetooth device, search for available devices. You should see “BiLT DWO-6” or a similar name listed. Select it to initiate the pairing process.
6. If prompted, enter a PIN code. The default PIN code for BiLT Bluetooth helmets is usually 0000. However, it’s best to refer to your helmet’s user manual for confirmation.
7. Once the pairing is successful, you will hear a confirmation tone or voice prompt. Your helmet is now paired with your device, and you can enjoy all its Bluetooth capabilities.

Remember that pairing instructions may vary slightly depending on the specific model of your BiLT Bluetooth helmet and the device you’re pairing it with. Refer to your helmet’s user manual for detailed instructions tailored to your specific setup.

Using the Helmet

Once your BiLT Bluetooth helmet is paired with your devices, you can enjoy a variety of features designed to enhance your riding experience. These features include hands-free calling, music streaming, and GPS navigation.

To make a call, simply press the multi-function button once to answer an incoming call or twice to initiate an outgoing call. Use your voice assistant on your smartphone to make calls hands-free, or use the helmet’s built-in controls to dial numbers or access your call history. You can also adjust the volume of calls and music using the dedicated volume controls on the helmet.

To listen to music, stream audio from your smartphone or GPS navigation system. Use the multi-function button to play, pause, skip tracks, or adjust the volume. The helmet provides high-quality audio, allowing you to enjoy your favorite playlists or audiobooks while riding.

For navigation, pair your helmet with your GPS navigation system. The helmet’s built-in speakers will deliver clear audio directions, keeping you on track without the need to glance at your phone. You can also use the multi-function button to control the volume of navigation instructions.

The BiLT Bluetooth helmet also features a variety of additional functionalities, such as intercom communication for riders in a group, voice command support, and customizable settings. Refer to your helmet’s user manual for detailed instructions on how to access and use these features.

Intercom Features

The BiLT Bluetooth helmet offers an intercom feature that allows you to communicate with other riders equipped with compatible Bluetooth helmets. This enables you to stay connected with your riding group, share information, and enhance your overall riding experience.

To use the intercom feature, you need to pair your helmet with the helmets of other riders. The pairing process is usually straightforward and involves putting your helmet into pairing mode and searching for other compatible helmets within range; Consult your helmet’s user manual for specific instructions on pairing your helmet with others.

Once your helmet is paired with another rider’s helmet, you can initiate an intercom conversation by pressing and holding the dedicated intercom button on your helmet. You can then speak into the built-in microphone, and your voice will be transmitted to the other rider’s helmet. The intercom feature supports multiple riders, allowing you to communicate with a group of riders simultaneously.

The BiLT Bluetooth helmet’s intercom system typically features noise cancellation technology to reduce background noise and enhance audio clarity. This ensures that you can hear the other rider’s voice clearly, even in noisy environments. You can also adjust the volume of the intercom conversation to your preferred level.

The intercom feature is a valuable addition to the BiLT Bluetooth helmet, allowing you to stay connected with your riding group and enhance your safety and enjoyment on the road.

Troubleshooting

While the BiLT Bluetooth helmet is designed for reliability, you may encounter occasional issues. Here are some common problems and their potential solutions⁚

• Intercom issues⁚ If you’re experiencing problems with the intercom, ensure that both helmets are paired correctly and within range. Check if the intercom volume is adjusted properly and if the microphone is functioning correctly. If the problem persists, try restarting both helmets or resetting the Bluetooth connection.
• Battery life⁚ If your helmet’s battery drains quickly, ensure you’re using the provided charging cable and a suitable power source. Avoid overcharging the battery, and check for any damage to the charging port. If the battery still drains prematurely, consider contacting the manufacturer for assistance.
• Connectivity problems⁚ If you’re having trouble connecting your helmet to your phone or other devices, make sure Bluetooth is enabled on both devices and that the helmet is in pairing mode. Check if the helmet is within range of the device and if there are any other Bluetooth devices interfering with the connection. You may need to remove other devices from the Bluetooth list or restart both devices.
• Audio quality issues⁚ If you notice distorted audio or low volume, ensure the helmet’s volume is adjusted properly. Check for any obstructions near the microphone or speakers, and verify that the earcups are securely fitted. If the problem persists, consider cleaning the microphone and speakers gently.
• LED light indicator⁚ The LED light indicator on your helmet provides information about its status. Refer to the user manual for specific meanings of different colors and flashing patterns. If you’re experiencing unusual behavior with the LED light, consult the user manual or contact the manufacturer for assistance.

If you’re unable to resolve the issue by following these steps, contact the BiLT customer support team for further assistance.

Safety and Maintenance

The safety and longevity of your BiLT Bluetooth helmet depend on proper care and maintenance. Here are some essential guidelines to follow⁚

• Regular cleaning⁚ Clean the helmet’s exterior with a damp cloth and mild detergent, avoiding harsh chemicals or abrasive cleaners. Pay particular attention to the visor, ensuring it’s free of scratches and debris. You can use a dedicated visor cleaner for optimal results. Avoid using cleaning products that might damage the helmet’s materials or electronics.
• Storage⁚ Store the helmet in a cool, dry place, avoiding direct sunlight or extreme temperatures. This helps prevent damage to the helmet’s materials and electronics. When not in use, store the helmet in a helmet bag or a designated storage area to protect it from dust and scratches.
• Battery care⁚ Follow the charging instructions provided in the user manual. Avoid overcharging the battery, as it can shorten its lifespan. Store the helmet with a partially charged battery to prevent long periods of inactivity from damaging the battery. If you’re not using the helmet for extended periods, disconnect it from the charger and store it in a cool, dry place.
• Visor replacement⁚ If the visor becomes scratched or damaged, replace it with a new one. Ensure the replacement visor is compatible with your helmet model. Follow the instructions provided in the user manual for proper visor installation. A scratched or damaged visor can compromise your vision and safety.
• Professional inspection⁚ If you’ve had an accident or the helmet has sustained significant impact, take it to a qualified helmet inspection service for evaluation. A damaged helmet may not provide adequate protection in future accidents. Always prioritize your safety and replace a damaged helmet immediately.

By following these maintenance guidelines, you can ensure the longevity and safety of your BiLT Bluetooth helmet.

Specifications

The BiLT Bluetooth helmet boasts a range of technical specifications that contribute to its functionality and performance. These specifications provide insights into the helmet’s capabilities and limitations, enabling you to make informed decisions regarding its suitability for your specific needs.

• Bluetooth Version⁚ The helmet typically utilizes Bluetooth 4.0 or a later version, ensuring stable and reliable connectivity with your smartphone or other Bluetooth devices. This version offers improved energy efficiency and faster data transfer speeds, enhancing the overall user experience.
• Intercom Range⁚ The intercom range varies depending on the specific model, but it generally extends up to a certain distance, allowing clear communication with other riders within a specific range. This range enables seamless communication within your riding group, enhancing safety and camaraderie.
• Battery Life⁚ The battery life of the helmet typically provides several hours of talk time and standby time. The specific duration varies based on factors such as volume level and intercom usage. You can check the user manual for detailed information on battery life and charging time.
• Water Resistance⁚ The BiLT Bluetooth helmet is designed to be water-resistant, making it suitable for use in moderate rain or snow conditions. However, it’s important to note that it is not waterproof and should not be subjected to prolonged immersion in water. Avoid using the helmet in severe weather conditions to ensure its longevity and functionality.
• Weight⁚ The helmet’s weight is a crucial factor for comfort during long rides. The BiLT Bluetooth helmet is designed to be lightweight, minimizing fatigue and maximizing comfort during extended rides. Check the user manual for specific weight information.

These specifications provide a comprehensive understanding of the BiLT Bluetooth helmet’s technical capabilities, allowing you to choose the model that best suits your individual needs and preferences. By familiarizing yourself with these specifications, you can ensure a satisfying and safe riding experience.